logo
Invia messaggio
salesteam@hyclamavin.com
Richiedere un preventivo|
Casa ProdottiPneumatici con due mascelle parallele

2 Jaw Parallel Gripper, Multi-tooth Guidance TWN-P

Tutti i prodotti
Pneumatici con due mascelle parallele (64)
Apparecchiatura di presa pneumatica a lungo tratto (16)
Apparecchiature per la presa angolare pneumatica (4)
3 Manico pneumatico (16)
Cambi utensili veloci (23)
Certificazione
Cina Shanghai Grand Intelligent Machinery Co., Ltd., Certificazioni
Sono ora online in chat

2 Jaw Parallel Gripper, Multi-tooth Guidance TWN-P

2 Jaw Parallel Gripper, Multi-tooth Guidance TWN-P
2 Jaw Parallel Gripper, Multi-tooth Guidance TWN-P

Grande immagine :  2 Jaw Parallel Gripper, Multi-tooth Guidance TWN-P

Dettagli:
Termini di pagamento e spedizione:
Quantità di ordine minimo: 1
Contatto
Descrizione di prodotto dettagliata

2 Jaw Parallel Gripper, Multi-tooth Guidance TWN-P

Compact structure can be used for short stroke and heavy load

The load is distributed to more surfaces to reduce the contact stress

Grease can be distributed more quickly and evenly

It can ensure enough motion rigidity and accuracy for a long time

  • Fast Delievery
  • Quality Assurance
  • 24/7 Customer Service
Product Introduction

2 Jaw Parallel Gripper, Multi-tooth Guidance TWN-P 0

Excellent performance

1. The TWN-P grippers adopt high precision, permanent lubrication, multi-tooth and straight groove guidance.

  • Compact structure can be used for short stroke and heavy load
  • The load is distributed to more surfaces to reduce the contact stress
  • Grease can be distributed more quickly and evenly
  • It can ensure enough motion rigidity and accuracy for a long time
  • The oil storage structure in the multi tooth guide extends the service life
  • Maximum finger length can be increased by 50%

2. The TWN-P grippers have a variety of sensor interfaces and pneumatic interfaces.

2 Jaw Parallel Gripper, Multi-tooth Guidance TWN-P 1

Gripping force maintenance-AS/IS

1. The TWN-P grippers can be equipped with gripping force maintenance, expanded to TWN-P- AS/IS(AS:closing maintenance, IS:opening maintenance ).

2. The spring is used as the holding accumulator, gripping force maintenance ensure a minimum clamping force in the event of a pressure drop.

2 Jaw Parallel Gripper, Multi-tooth Guidance TWN-P 2

Dust-tight version

The TWN-P grippers can be equipped with dust-tight version, expanded to TWN-P-SD, and reach IP64.

High-temperature version

The TWN-P grippers can be equipped with high temperature version, expanded to TWN-P-HT, the temperature tolerance range is increased from 5/90℃ of the basic version to 5/130℃.

Model and Technical Parameters

Model Stroke per jaw [mm] Closing/ opening force[N] Min. spring force[N] Weight [kg] Recommended workpiece weight[kg] Closing/ opening time[s] Repeat accuracy [mm] Protecti on class IP
TWN-P-40A-1 2.5 198/210 0.08 0.99 0.02/0.02 0.01 40/64
TWN-P-40A-1-AS 2.5 258/- 60 0.1 0.99 0.02/0.03 0.01 40/64
TWN-P-40A-1 2.5 -/280 70 0.1 0.99 0.03/0.02 0.01 40/64
TWN-P-50A-1 4 240/255 0.16 1.2 0.02/0.02 0.01 40/64
TWN-P-50A-1-AS 4 330/- 90 0.2 1.2 0.02/0.03 0.01 40/64
TWN-P-50A-1-IS 4 -/345 90 0.2 1.2 0.03/0.02 0.01 40/64
TWN-P-50A-2 2 430/460 0.16 2.15 0.02/0.02 0.01 40/64
TWN-P-50A-2-AS 2 550/- 120 0.2 2.15 0.02/0.03 0.01 40/64
TWN-P-50A-2-IS 2 -/580 120 0.2 2.15 0.03/0.02 0.01 40/64
TWN-P-64A-1 6 360/388 0.26 1.8 0.02/0.02 0.01 40/64
TWN-P-64A-1-AS 6 515/- 155 0.36 1.8 0.02/0.04 0.01 40/64
TWN-P-64A-1-IS 6 -/543 155 0.36 1.8 0.04/0.02 0.01 40/64
TWN-P-64A-2 3 730/785 0.26 3.65 0.02/0.02 0.01 40/64
TWN-P-64A-2-AS 3 1040/- 310 0.36 3.65 0.02/0.04 0.01 40/64
TWN-P-64A-2-IS 3 -/1095 310 0.36 3.65 0.04/0.02 0.01 40/64
TWN-P-80A-1 8 565/630 0.52 2.82 0.04/0.04 0.01 40/64
TWN-P-80A-1-AS 8 805/- 240 0.6 2.82 0.03/0.05 0.01 40/64
TWN-P-80A-1-IS 8 -/870 240 0.6 2.82 0.05/0.03 0.01 40/64
TWN-P-80A-2 4 1145/1275 0.52 5.72 0.04/0.04 0.01 40/64
TWN-P-80A-2-AS 4 1535/- 390 0.6 5.72 0.03/0.05 0.01 40/64
TWN-P-80A-2-IS 4 -/1665 390 0.6 5.72 0.05/0.03 0.01 40/64
TWN-P-100A-1 10 930/995 0.9 4.65 0.07/0.07 0.01 40/64
TWN-P-100A-1-AS 10 1300/- 370 1.1 4.65 0.05/0.09 0.01 40/64
TWN-P-100A-1-IS 10 -/1345 350 1.1 4.65 0.09/0.05 0.01 40/64
TWN-P-100A-2 5 1860/2000 0.9 9.3 0.07/0.07 0.01 40/64
TWN-P-100A-2-AS 5 2400/- 540 1.1 9.3 0.05/0.09 0.01 40/64
TWN-P-100A-2-IS 5 -/2700 700 1.1 9.3 0.09/0.05 0.01 40/64
TWN-P-110A-1 20 1230/1330 2.5 6.15 0.15/0.15 0.01 40/64
TWN-P-125A-1 13 1475/1590 1.4 7.37 0.10/0.10 0.01 40/64
TWN-P-125A-1-AS 13 2125/- 650 1.9 7.37 0.08/0.12 0.01 40/64
TWN-P-125A-1-IS 13 -/2240 650 1.9 7.37 0.12/0.08 0.01 40/64
TWN-P-125A-2 6 2990/3220 1.4 14.95 0.10/0.10 0.01 40/64
TWN-P-125A-2-AS 6 4190/- 1200 1.9 14.95 0.08/0.12 0.01 40/64
TWN-P-125A-2-IS 6 -/4420 1200 1.9 14.95 0.12/0.08 0.01 40/64
TWN-P-160A-1 16 2600/2715 3 13 0.10/0.10 0.01 40/64
TWN-P-160A-1-AS 16 3550/- 900 3.8 13 0.10/0.20 0.01 40/64
TWN-P-160A-1-IS 16 -/3615 900 3.8 13 0.20/0.10 0.01 40/64
TWN-P-160A-2 8 5270/5500 3 26.35 0.10/0.10 0.01 40/64
TWN-P-160A-2-AS 8 6770/- 1500 3.8 26.35 0.10/0.20 0.01 40/64
TWN-P-160A-2-IS 8 -/7000 1500 3.8 26.35 0.20/0.10 0.01 40/64
TWN-P-200A-1 25 4300/4500 5.5 21.5 0.30/0.30 0.02 40/64
TWN-P-200A-1-AS 25 5600/- 1300 7 21.5 0.30/0.60 0.02 40/64
TWN-P-200A-1-IS 25 -/6000 1500 7 21.5 0.60/0.30 0.02 40/64
TWN-P-200A-2 14 7700/8100 5.5 38.5 0.30/0.30 0.02 40/64
TWN-P-200A-2-AS 14 10200/- 2500 7 38.5 0.30/0.60 0.02 40/64
TWN-P-200A-2-IS 14 -/10900 2800 7 38.5 0.60/0.30 0.02 40/64
TWN-P-240A-1 30 5450/5680 8.7 27.25 0.50/0.50 0.04 40/64
TWN-P-240A-1-AS 30 8200/- 2750 11.8 27.25 0.45/0.90 0.04 40/64
TWN-P-240A-1-IS 30 -/8430 2750 11.8 27.25 0.90/0.45 0.04 40/64
TWN-P-240A-2 17 9440/9850 8.9 47.2 0.50/0.50 0.04 40/64
TWN-P-240A-2-AS 17 14590/- 5150 12 47.2 0.45/0.90 0.04 40/64
TWN-P-240A-2-IS 17 -/15000 5150 12 47.2 0.90/0.45 0.04 40/64
TWN-P-300A-1 35 6850/7190 13.6 34.25 0.50/0.50 0.05 40/64
TWN-P-300A-1-AS 35 8600/- 1750 17.3 34.25 0.40/0.70 0.05 40/64
TWN-P-300A-1-IS 35 -/8940 1750 17.3 34.25 0.70/0.40 0.05 40/64
TWN-P-300A-2 20 11870/12460 13.6 59.35 0.50/0.50 0.05 40/64
TWN-P-300A-2-AS 20 15870/- 4000 17.3 59.35 0.40/0.70 0.05 40/64
TWN-P-300A-2-IS 20 -/16460 4000 17.3 59.35 0.70/0.40 0.05 40/64
TWN-P-380A-1 45 10700/11100 27 53.5 0.60/0.60 0.05 40/64
TWN-P-380A-1-AS 45 14300/- 3600 37 53.5 0.50/0.80 0.05 40/64
TWN-P-380A-1-IS 45 -/14800 3700 37 53.5 0.80/0.50 0.05 40/64
TWN-380A-2 26 20500/21300 27 102.5 0.60/0.60 0.05 40/64
TWN-P-380A-2-AS 26 27400/- 6900 37 102.5 0.50/0.80 0.05 40/64
TWN-P-380A-2-IS 26 -/28300 7000 37 102.5 0.80/0.50 0.05 40/64

Recommended accessories

2 Jaw Parallel Gripper, Multi-tooth Guidance TWN-P 3

Prodotto Tag:

Movimento parallelo con due pinze a mascella,

2 Gattone della mascella,

con una lunghezza massima non superiore a 50 mm

Dettagli di contatto
Shanghai Grand Intelligent Machinery Co., Ltd.,

Persona di contatto: Lu Jie

Telefono: +8613918561110

Fax: 86-21-56511136

Invia la tua richiesta direttamente a noi (0 / 3000)

Notizie
Cina notizie su Qual e' la differenza tra disallineamento parallelo e angolare?

Qual e' la differenza tra disallineamento parallelo e angolare?

Cina notizie su Come funziona una pinza pneumatica?

Come funziona una pinza pneumatica?

Cina notizie su Qual è la differenza tra le pinze parallele e quelle angolari?

Qual è la differenza tra le pinze parallele e quelle angolari?

contattici
Factory Indirizzo:N. 422 Xuanxia Road, Pudong New Area, Shanghai, Cina.
Ufficio vendite:No. 355 Yichuan Road, Putuo District, Shanghai, Cina.
+86-21-56511136
salesteam@hyclamavin.com
Lasciare messaggio

politica sulla riservatezza | Cina buon Qualità Pneumatici con due mascelle parallele Fornitore. © 2025 Shanghai Grand Intelligent Machinery Co., Ltd.,. All Rights Reserved.